MCU-DM150
Back

PHASE DIMMER

Light intensity under control

MCU-DM is the miniature electronic control unit with dimmer function, for wireless and wired control of LED lights, and resistive, inductive and capacitive loads (standard and electronic transformers) up to 150 W. 2 wired inputs that can be set, including a specific one-hour fade function. Wide-ranging and accurate dimmer function; fade on and off that can be set to between 0 and 10 seconds. The ISM (industrial, scientific and medical) radio frequency band guarantees a long range, even through walls and ceilings. Simple programming with dip-switch, reduced dimensions with breakable tabs for fixing with screws or for insertion into interconnection boxes with 55 mm diameter.

SETTABLE FUNCTIONS

  • Soft ON (0-0.5-2-4-10 seconds)
  • Soft OFF (0-0.5-2-4-10 seconds)
  • Storage of last intensity and colour selected
  • Minimum intensity setting

RADIO FUNCTIONS

  • On / Off
  • Dimmer intensity
  • Soft close 1h

WIRED INPUT FUNCTIONS

Mode 1

  • P1: On / Off - Dimmer intensity
  • P2: Soft Off 1h

Mode 2

  • P1: On - Dimmer Up
  • P2: Off - Dimmer Down
TECHNICAL DATA
Type of load that can be connected

LED lamps Resistive and halogen lights Inductive loads (L) Electronic transformers (C) 

Power supply

110-230 VAC

Max power (with 230 VAC)

150 W

Operating temp.

-20 +55 °C

Dimensions

52x42x21 mm 

Protection rating

IP20 

Radio frequency

433.92 MHz ISM
 

AVAILABLE VERSIONS
MCU-DM150

Dimmer for 110-240 VAC loads up to 150 W with RX 433.92 MHz, 2 wired inputs.

MCU-DM150/C

Dimmer for 110-240 VAC loads up to 150 W with 2 wired inputs.
(WIRED ONLY)